Verlinden Productions

WEST SYSTEM - 655-2QT West System 655-2 QT G/Flex Epoxy Adhesive, Two 1 Qt

Description: Store New Arrivals Add to Favorite View Feedback Contact WEST SYSTEM - 655-2QT West System 655-2 QT G/Flex Epoxy Adhesive, Two 1 Qt Description Item model number 655-2QT Compatible Material Plastic Is Discontinued By Manufacturer No Brand West System Material Polyester Specific Uses For Product Repair, Woodworking Item Form Liquid Package Dimensions 9.2 x 5.6 x 5.4 inches; 4.56 Pounds Manufacturer Gougeon Brothers, Inc. EXCELLENT ADHESION adhesion to hard-to bond woods. This toughened, versatile, thickened epoxy is for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration.IDEAL FOR BONDING dissimilar materials. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs, workable cure in 7-10 hours, and full cure in 24 hours.OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass.BONDS MANY MATERIALS including dissimilar ones. G/flex has a superior grip so that it can be used to bond to metals, plastics, glass, masonry, and fiberglass. G/flex is ideal for repairs to aluminum boats and polyethylene and ABS canoes and kayaks. It can also be used to wet out and bond fiberglass tapes and fabrics.MAKES STRUCTURAL BONDS that can absorb the stress of expansion, contraction, shock, and vibration. G/flex can be used on damp or wet surfaces, and even underwater when applied with specific techniques. Perfect for repairs to plastic boats, canoes or kayaks made of polyethylene or ABS. Product Description WEST SYSTEM Specialty Epoxies These specialty epoxies add even more versatility to the WEST SYSTEM line of epoxies. G/flex Thickened Epoxy syringe Great on plastics including HDPE, LDPE, ABS, PVC, Polycarbonate, and Hypalon.Easy-to-use syringe to dispense small quantities of epoxyViscosity similar to gel toothpaste—won’t run or sag G/flex 655 is a toughened epoxy that makes permanent, waterproof structural bonds. It absorbs the stresses of expansion, contraction, shock, and vibration. G/flex adheres tenaciously to HDPE, LDPE ABS, PVC, Polycarbonate, and Hypalon plastics. It also bonds metal, glass, masonry, fiberglass, and wood. The G/flex 655-1 syringe contains 0.42 oz of resin and 0.42 oz of hardener, perfect for small repair jobs. G/flex Thickened Epoxy Adhesive Great on plastics including HDPE, LDPE, ABS, PVC, Polycarbonate, and Hypalon.Easy-to-use syringe to dispense small quantities of epoxyViscosity similar to gel toothpaste—won’t run or sag G/flex 655 is a toughened epoxy that makes permanent, waterproof structural bonds. It absorbs the stresses of expansion, contraction, shock, and vibration. G/flex adheres tenaciously to HDPE, LDPE ABS, PVC, Polycarbonate, and Hypalon plastics. It also bonds metal, glass, masonry, fiberglass, and wood. The G/flex 655-1 syringe contains 0.42 oz of resin and 0.42 oz of hardener, perfect for small repair jobs. G/flex is a 1:1 ratio, 2-part, toughened epoxy Great on plastics including HDPE, LDPE, ABS, PVC, Polycarbonate, and Hypalon.Easy-to-use syringe to dispense small quantities of epoxyViscosity similar to gel toothpaste—won’t run or sag G/flex 655 is a toughened epoxy that makes permanent, waterproof structural bonds. It absorbs the stresses of expansion, contraction, shock, and vibration. G/flex adheres tenaciously to HDPE, LDPE ABS, PVC, Polycarbonate, and Hypalon plastics. It also bonds metal, glass, masonry, fiberglass, and wood. The G/flex 655-1 syringe contains 0.42 oz of resin and 0.42 oz of hardener, perfect for small repair jobs. G/flex Thickened Epoxy Adhesive, just stir and apply Great on plastics including HDPE, LDPE, ABS, PVC, Polycarbonate, and Hypalon.Easy-to-use syringe to dispense small quantities of epoxyViscosity similar to gel toothpaste—won’t run or sag G/flex 655 is a toughened epoxy that makes permanent, waterproof structural bonds. It absorbs the stresses of expansion, contraction, shock, and vibration. G/flex adheres tenaciously to HDPE, LDPE ABS, PVC, Polycarbonate, and Hypalon plastics. It also bonds metal, glass, masonry, fiberglass, and wood. The G/flex 655-1 syringe contains 0.42 oz of resin and 0.42 oz of hardener, perfect for small repair jobs. G/flex 655, now available in a convenient syringe G/flex 655, now available in a convenient syringe The G/flex 655-1 syringe dispenses resin and hardener at the correct 1:1 ratio. G/flex is blended before application. WEST SYSTEM Specialty Epoxies Six10 Thickened Epoxy Adhesive Six10 Thickened Epoxy Adhesive is a two-part epoxy with a consistency similar to gel toothpaste. We manufacture it under vacuum to prevent entrapped air bubbles. Our in-house chemists formulated this toughened system with 8% elongation. Conveniently, Six10 requires no hand mixing when used with a standard caulk gun and the static mixing wand that comes with each cartridge (pictured caulk gun not included). The self-metering coaxial cartridge dispenses a gap-filling, structural adhesive that bonds tenaciously to wood, metals, fiberglass, and concrete. Six10 has a working time of over 40 minutes until the mixing wand becomes unusable. This adhesive has shear thinning properties, which means it moves more like a liquid when you work the material. This allows its use in cooler temperatures. You can also use it to wet out lightweight fiberglass cloth. It will cure in temperatures as low as 50°F (10°C). G/flex Epoxies G/flex is a two-part, toughened epoxy that can make structural bonds which absorb the stress of expansion, contraction, shock, and vibration. We formulated this system for high elongation with an ultimate elongation of around 30%. The increase in elongation and lower modulus (stiffness) that it provides equates to better adhesion to substrates. This helps it resist a peel or delamination from starting. G/flex has a 1:1 mix ratio by volume for easy measuring. It’s also ideal for bonding dissimilar materials. We offer it in two versions. The liquid version, G/flex 650, has a consistency similar to honey. You can thicken it with 406 Colloidal Silica to reach the same viscosity as the 655. The pre-thickened version, G/flex 655, has a consistency like gel toothpaste. With proper application techniques, it will bond to wet/damp substrates and dense or oily woods like teak and oak. G/5 Five-Minute Adhesive G/5 Five-Minute Adhesive is a two-part adhesive that will cure to a gel state within minutes. It has a 1:1 mix ratio by volume. You can wet sand it about 30 minutes after application. It is ideal for a temporary, quick cure that’s convenient for some applications like fabricating a quick custom sanding block with some scrap fiberglass cloth and a piece of foam. G/5 should not be used where high loads are expected or if it will be continually immersed in water. Add to Cart Add to Cart Add to Cart Add to Cart Customer Reviews 4.6 out of 5 stars 282 4.8 out of 5 stars 1,409 4.8 out of 5 stars 532 4.8 out of 5 stars 15 Price $32.18$32.18 $32.11$32.11 $34.99$34.99 $81.21$81.21 Mix ratio, resin:hardener NA (dispenses at proper ratio) 1:1 1:1 1:1 Pot life @72°F 42 minutes (in static mixing wand) 45 minutes 45 minutes 3-5 minutes Working time, thin film @72°F 42 minutes 45 minutes 45 minutes 3-5 minutes Cures to a solid, thin film @72°F 5 to 6 hours 3 to 4 hours 3 to 4 hours 5 minutes Cures to working strength @72°F 1 to 4 days 7 to 10 hours 7 to 10 hours 15 minutes Minimum working temp 50°F (4°C) 40°F (4°C) 40°F (4°C) Hardness (Shore D) ASTM D-2240 80.6 75 75 Compression yield (ASTM D-685 9,690 psi 5,270 psi 5,270 psi Tensile strength ASTM D-638 6,440 psi 3,440 psi 5,270 psi Flexural strength ASTM D-790 11,300 psi 5,190 psi 5,270 psi WEST SYSTEM Epoxies WEST SYSTEM offers high-quality epoxy resins, hardeners, fillers, and additives. Developed by our in-house chemists, our formulations are proprietary, structural, and marine grade. These epoxies have set the standard for epoxy quality in the marine industry and beyond since 1969. An ISO 9001:2015 certified company Founded in 1969, Gougeon Brothers, Inc. (GBI) formulates and manufactures WEST SYSTEM products. In 2020, NSF International recertified GBI's ISO 9001:2015 status, which ensures consistency in epoxy formulation, production, packaging, and instructional materials. ABOUT US We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more. SHIPPING We are always working hard to ensure your package arrives as soon as possible. Please understand that some factors like weather, high postal traffic, and the performance of shipping companies are outside of our control. For shipping outside of the continental USA, we only use eBays Global Shipping Program.The item is shipped to KY and then sent to the rest of the world. International customers are responsible for all duties and taxes. Continue to check out in order to calculate costs for shipping the item to your country. Messages regarding eBays Global Shipping Program MUST be directed at eBay EXCLUSIVELY. RETURNS We offer a 30-Day Return Policy on items which you are not completely satisfied with. You have the option for a full-refund or an exchange of the item. No returns are available on items shipped outside of the USA. PAYMENT We accept PayPal. CONTACT US This page content is yet to come Please ad us to your favorite seller and visit again later Thank You CUSTOMER SATISFACTION We try our very best to make sure every customer is completely satisfied. If theres a problem, message us! Were happy to help. WE ACCEPT Copyright © 2021 AutoDS. | All Rights Reserved

Price: 156.33 USD

Location: North York, Ontario

End Time: 2025-01-22T04:01:31.000Z

Shipping Cost: 0 USD

Product Images

WEST SYSTEM - 655-2QT West System 655-2 QT G/Flex Epoxy Adhesive, Two 1 QtWEST SYSTEM - 655-2QT West System 655-2 QT G/Flex Epoxy Adhesive, Two 1 QtWEST SYSTEM - 655-2QT West System 655-2 QT G/Flex Epoxy Adhesive, Two 1 Qt

Item Specifics

Restocking Fee: No

Return shipping will be paid by: Buyer

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money back or replacement (buyer's choice)

Brand: Gougeon Brothers, Inc.

Compatible Material: Plastic

Is Discontinued By Manufacturer: No

Item Form: Liquid

Item model number: 655-2QT

Manufacturer: Gougeon Brothers, Inc.

Material: Polyester

MPN: Does not apply

Package Dimensions: 9.2 x 5.6 x 5.4 inches; 4.56 Pounds

Specific Uses For Product: Repair, Woodworking

Type: Does not apply

Recommended

West System 105A Epoxy Resin (32 Fl Oz) Bundle with 206A Slow Epoxy Hardener (7
West System 105A Epoxy Resin (32 Fl Oz) Bundle with 206A Slow Epoxy Hardener (7

$100.81

View Details
The Gougeon Brothers on Boat Construction 1985 Hardcover 4th Edition Revised
The Gougeon Brothers on Boat Construction 1985 Hardcover 4th Edition Revised

$49.99

View Details
Boatbuilder Magazine 24 Issues Gougeon Brothers Build Boats Epoxy
Boatbuilder Magazine 24 Issues Gougeon Brothers Build Boats Epoxy

$100.00

View Details
Boatbuilder Magazine COMPLETE 1984 6 Issues Gougeon Brothers Build Boats Epoxy
Boatbuilder Magazine COMPLETE 1984 6 Issues Gougeon Brothers Build Boats Epoxy

$23.70

View Details
WEST SYSTEM - 655-2QT West System 655-2 QT G/Flex Epoxy Adhesive, Two 1 Qt
WEST SYSTEM - 655-2QT West System 655-2 QT G/Flex Epoxy Adhesive, Two 1 Qt

$156.33

View Details
Boatbuilder Magazine COMPLETE 1985 6 Issues Gougeon Brothers Build Boats Epoxy
Boatbuilder Magazine COMPLETE 1985 6 Issues Gougeon Brothers Build Boats Epoxy

$28.45

View Details
G/Flex 655-1 1 Oz Syringe
G/Flex 655-1 1 Oz Syringe

$23.00

View Details