Description: Model: PD2-M1-A Includes wireless focus motor and 3-Channel hand controller Hand Controller is capable of controlling up to three motors Motor is now thinner and lighter than the previous generation 4 times drive resolution than the previous generation New easy motor calibration works on lenses with and without hard stops Motor display shows channel, signal strength, battery life, motor voltage, and Bluetooth connection confirmation in addition to Motor position Brushless motors were designed in and imported from Germany 2.4G wireless technology, a Bluetooth 4.0 module, and full-duplex transmission for distance, control, and accuracy Maximum transmission distance of 100m High-capacity integrated battery gives 30 hours of operation time Adaptable for 3D shooting What's Included: 1 x Focus/Iris/Zoom Controller 1 x PD-RX REMOTE AIR Receiver Motor 1 x D-Tap Power Cable 1 x USB Charging Cable 1 x Micro-USB Charging Cable 1 x 15mm/19mm Adapter Bushing 2 x Glow in the Dark Marking Disk 2 x Short Antenna 2 x Long Antenna 1 x Lanyard Shipping Weight (lbs): 3 Shipping Dimensions (in): 11 x 8 x 4 Battery: Controller: Voltage: 3.7 VDC | Capacity: 2040 mAh || Motor: 12 to 18 VDC Dimensions: Controller - Body: Width: 1.91" / 4.85 cm Thickness: 0.70" / 1.78 cm | Handwheel: Width: 2.43" / 6.17 cm Thickness: 2.25" / 5.72 cm || Motor - 4.23 x 2.6 x 0.91" / 10.74 x 6.6 x 2.31 cm Fixture Weight: Controller: 0.63 lb / 0.29 kg | Motor: With 15 mm Rod Clamp: 0.41" / 1.04 cm Without 15 mm Rod Clamp: 0.36" / 0.91 cm Gearing: MOD: 0.8 Teeth: 40 Noise Db: <28 dB Power: Charger: Input: 100 to 240 VAC, 50/60 Hz, 0.18 A Output: 5 VDC, 1.2 A Torque: 0.8 Nm UPC Code: 847983030941 PD2-M1-A The Remote Air 4 Single Motor Wireless Lens Control Kit is in the PD Movie family of wireless lens controllers and motors. It includes a single wireless receiving motor, and it comes with a Wi-Fi controller with a 328′ range. The system supports 19 channels, so you can find clean communication between controller and motor, even when using multiple motors in a FIZ (focus, iris, zoom) setup. The included motor is a receiver motor, that has a built-in wireless antenna and power port. This motor features a cine-style drive gear with 0.8 MOD and can drive either focus, iris, or zoom on a lens with cine-style gears. If you need to drive more than one lens ring, you will need an additional motor, but you can use one without the wireless receiver as you can daisy chain motors together. The calibration procedure has been simplified and you can calibrate lenses with or without hard stops. Built-in OLED screens on the motor and handwheel provide clear information on the state of your system. The motor is designed and built in Germany Extremely Thin The housing for the Remote Air motor has been re-imagined with the goal of making the unit thinner and lighter while expanding its functionality. The motor is now 17mm thick, and also has a twice the amount of torque making the unit more flexible and stronger. 4 Times The Drive Resolution The Motor Air has 8192 levels of resolution which is 4 times higher than the previous generation. When operating the motor at any speed setting, it can execute the operation with extreme accuracy. New OLED Screen Placement The receiver motor OLED screen has been moved to the side of the motor. It uses a new screen display mode and is much easier to see from any angle. It can display signal channel, signal strength and the controllers’ battery information. Bluetooth 4.0 Connectivity The controller adds the master and slave mode, brand new design for motor and perfect function. A new configuration of REMOTE AIR 4 solves all focus problems that you meet during the filming, it is more comprehensive, convenient and saving time. Right and Left-Hand Control The Remote Air 4 controller includes a function that allows the operator to change the orientation of the hand wheel at any time. This means maintaining accurate control whether you are left- or right-handed, and regardless of your orientation to the camera. 100M Transmission Distance The Remote Air 4 utilizes 2.4G wireless technology and full duplex signal transmission to transmit and receive data remarkably quickly. While movement is registered on the controller, the motor is simultaneously transmitting position data to accurately reflect movement and positioning in a fraction of a second. Anti-interference and error correction functions are in place to keep controllers and motors connected and communicating at a distance of up to 100m. All Functions In One Button The Remote Air 4 motor allows you to easily access all of the functions with only one button. You can calibrate your lens manually or automatically; adjust the lens speed to slow medium or fast; change the motor direction; cancel the calibration; and recover the calibration. Long Battery Life The Remote Air 4 controller has an integrated, high-capacity battery that can last up to 30 hours. If you need more, you can charge and power the unit using any standard 5v USB power bank. Compatible With Various Types of Lenses Whether it is a professional film lens or an SLR camera lens, REMOTE AIR 4 running quickly and fluently. 7~20V Input Voltage Support The motor is designed to be powered using an included D-Tap to 6-pin power cable. In this 4th-generation version, the motor supports a much more expanded 7-20V power input range. This means that you can connect it even to 7.2V DV batteries that have a D-Tap port. Such DV batteries are already available on the market. For 2D and 3D Shooting The Remote Air 4 can control up to three motors by itself, but can also be adapted for 3D shooting by assigning multiple motors to the same channel.
Price: 199.99 USD
Location: Houston, Texas
End Time: 2024-08-28T18:42:22.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 14 Days
Refund will be given as: Money Back
Compatible Brand: Universal, For Canon, For Fujifilm, For Nikon, For Panasonic, For Sony
Color: Black
MPN: PD2-M1-A
Material: Aluminum
To Fit: Camcorder, Camera, Camera: DSLR/SLR/TLR
California Prop 65 Warning: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
Brand: PD Movie
Type: Follow Focus
Mount Type: Snap-On
Manufacturer Warranty: 1 Year
Model: PD2-M1-A
Connectivity: Wireless
Features: Lens Focus, Lens Zoom
Country/Region of Manufacture: China
