Description: 1 set of replacement filters with following : 1 x Sediment Filter 5 micron Dirt/Rust remover Size 9 7/8 inch x 2.5 inch - Fits most standard 10 inch size housings and most reverse osmosis systems.Used to remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment, scale particles, and cloudiness from water. Meets FDA requirements for food and beverage contact. No leachable or extractable material to contaminate outflowing water. Long life and increased dirt holding capacity. No surface binders to reduce flow and increase change-out frequency. 1 x Pleated Sediment Filter Size 9 7/8" x 2.5" - Fits most standard 10" size housings and most reverse osmosis systems.Pleated Polypropylene Sediment Filter 5 micron Used to Remove small particles & suspended matter such as silt, rust, sand, algae, sediment, scale particles from water. Meets FDA requirements for food and beverage contact. Washable filter to help minimize the filtration cost. Operation Temperature: 40°F to 140°F. Low surface area, lower pressure drop. --> 1 x Cation Resin Cartridge Filters Size 9 7/8 inch x 2.5 inch - Fits most standard 10 inch size housings and most reverse osmosis systems. Capacity : 750 grains Maximum Recommended Flow Rate: 2.5 to 5 GPM (depends on incoming water pressure). Operational Temperature Range: 40°F to 100°F Maximum pressure: 125 PSI (8.6 bar) Minimum pressure: 20 PSI (1.4 bar) 5-Micron nominal rating. Cartridge capacity dimensions - ID: 30mm OD: 70mm Reduces Total Dissolved Solids (TDS) and hardness, can also be used as a pre-filter to prevent build-up of scale on sensitive equipment. End Caps: Polypropylene Inner/Outer Wraps: Polyolefin Netting: Polyethylene All filters are individually wrapped. 1 x Gac 10'' Carbon Filter Size 9 7/8 inch x 2.5 inch - Fits most standard 10 inch size housings and most reverse osmosis systems. Remove Chlorine, Turbidity, Bad Taste & Odor, Sediment, Dirt, and THMS from water. Thick Wall Coconut Base Carbon Filter Media - 100% coconut shell carbon Designed For maximum contact between the water and carbon. 1 Micron filter membrane included to prevent carbon fines to pass from the filter to your drinking water. Operation Temperature: 40°F to 125°F Total 3 filters, each individually wrapped.
Price: 54.95 USD
Location: Niagara Falls, New York
End Time: 2025-01-17T13:59:26.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Model: Max Water Replacement Water Filter Set
Modified Item: No
MPN: 104002~104004~104022
Custom Bundle: No
Brand: Max Water
Non-Domestic Product: No
Filtration Method: Iron Manganese Carbon/Charcoal
Type: Whole House Filter System
Color: Multicolor
Compatible Model: Max Water
