Trailer Towing Wiring Harness Kit for 2011 2012 2013 Kia Sorento w/o Tow Pkg.

Description: Hopkins Custom Fit Vehicle Wiring - HM111439144 FlatCustom FitTrailer Hitch WiringPowered ConverterHopkinsQuickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system. This Product Fits The Following Vehicles2011 - 2013 Kia Sorento Base I4 without factory tow package2011 - 2013 Kia Sorento EX I4 without factory tow package2011 - 2013 Kia Sorento EX V6 without Factory Tow Prep Package2011 - 2013 Kia Sorento LX I4 without factory tow package2011 - 2013 Kia Sorento LX V6 without Factory Tow Prep PackageFeatures:Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lightsCompatible with 5-pole, 6-pole and 7-pole adapters (sold separately)Connects quickly and easilyLocate connection points behind tail lightsPlug in connectorRun hot lead to car batteryIncludes a tail light converter to ensure that your vehicle's wiring matches that of your trailerPowered module connects directly to battery to avoid overloading vehicle's electrical systemProtective connection terminals resist corrosionComes with dust cap for 4-way flat connector, cable ties, and terminal grease packet for electrical connections90-Day limited warrantyInstallationThis custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness. Once you've plugged in the connector, run the red hot lead up to your car battery. Connect the included fuse holder, and then connect the fuse holder to the positive terminal on your battery.Once installation is complete, the 4-way connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.Powered Tail Light ConverterA tail light converter is built into this T-connector. This converter is a battery-powered unit that bypasses the electrical routes that are used by a basic wiring harness. As a result, there is virtually no draw on your tail light circuits.Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of the trailer. This converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.43914 Plug-in Simple Hopkins T-Connector with 4-Pole Trailer ConnectorInstallation Details

Price: 84.22 USD

Location: Fresno, California

End Time: 2025-01-24T01:40:15.000Z

Shipping Cost: 0 USD