Electriduct 6:1 Heavy Wall Adhesive Lined Heat Shrink Tubing

Description: Electriduct eBay Store FREE Shipping on All Items Expedited Shipping Available TOLL FREE Customer Service 6:1 Heavy Wall Heat Shrinkable Tubing - Electriduct Comes in 4 Foot Sticks Although very flexible in its nominal state, the 6 to 1 Heat Shrink Tubing after full recovery, is stiff and tough like a rock. Use this heat shrink to not only hold your connection, but to protect it from abrasions. Designed with an adhesive lined inside, air and water tight seals are a sure thing when using this high ratio heat shrinking tube. Resistant to UV- Radiation High Electrical Insulation Superior Mechanical PropertyDiameter: 0.75", 1", 1.3", 1.75", 2", 2.75", 3.5", 4.7"Attention: Sizes are approximate, and will vary by a few percent. Pack Qty: 1 Stick (4 Feet), 5 Sticks (20 Feet) Size ExpandedApproximate Measurements RecoveredApproximate Measurements Internal Diameter Wall Thickness Internal Diameter Wall Thinkness A D a d 3/4" 0.827" 0.0374" 0.123" 0.123" 1.3" 1.4" 0.0374" 0.2165" 0.1338" 1.75" 1.85" 0.0374" 0.2913" 0.1417" 2" 2.1" 0.0433" 0.327" 0.19" 2.75" 2.85" 0.0433" 0.46" 0.19" 3.5" 3.62" 0.0433" 0.673" 0.19" 4.7" 4.82" 0.0433" 0.9" 0.19" B/b is equaled to the Internal Diameter plus Wall Thickness times 2. (B=Ax2D) Property Result Test Method Operating Temperature -55°C TO +110°C IEC 216 Tensile Strength ≥14MPa ASTM D 2671 Tensile Strength after aging (158°C/168hrs.) ≥12MPa ASTM D 2671 Longitudinal Shrinkage 0 to -10% UL 224 Elongation at Break ≥400% ASTM D 2671 Elongation at Break after aging (150°C/168hrs.) ≥300% ASTM D 2671 Dielectric Strength ≥20kV/mm IEC 243 Volume Resistance ≥10 Ω.cm IEC 93 Heat Shock (225°C/4hrs.) No cracking or flowing ASTM D 2671 Water Absorption <0.2% ISO 62 Softening Point 85°C ASTM D E28 Peel Strength PE 4N/cm DIN 30672 Copper Stability Non-corrosive ASTM D 2671 Ressitance to Fungus and Decay Pass ISO 846 Adhesive Data: PROPERTY TEST METHOD VALUE Water absorption ISO 62 <0.2% Softening point ASTM E28 85±5°C Peel strength (PE) DIN 30672 4N/cm Resistance to fungus and decay ISO 846 Pass Shipping All our products include FREE Standard Shipping. If you need your order to be Expedited, please contact us to see the available options. We ship most of our orders within 1 business day and tracking is provided as soon as it ships. Small and light items usually ship via USPS First Class or Priority Mail. Medium and large packages typically ship via FedEx or UPS, and no PO Box address will be accepted for them. Returns Your satisfaction is of utmost importance to us and we support the 14 day return policy guidelines (you pay for return shipping). You must contact us beforehand to set up return and obtain your RMA#. Keep in mind that items need to be returned in the same resalable condition in which they were sent for a product refund to be applied, including original packaging. Note that your order may be subjected to a restocking fee to cover shipping and handling costs. Orders that shipped with Free Shipping actually do have a shipping cost and is not actually free. Those shipping costs are deducted from the credit amount of the return. About Us Electriduct is a wire management and cable protection company based in Fort Lauderdale, Florida. We supply products to those who are concerned about protecting their electronic equipment and also worried about the costs of workplace safety. This is achieved by offering high quality and reasonably priced solutions such as cord covers, cable raceway, wire loom, power distribution, braided sleeving, and much more. Hours of Operation (M-F) 9AM-5PM EST. We strive to complete all of our eBay transactions to the buyer's utmost satisfaction. If you have any questions, comments, or issues please contact us immediately so we can assist you.

Price: 19.99 USD

Location: Fort Lauderdale, Florida

End Time: 2024-08-17T20:05:14.000Z

Shipping Cost: 0 USD